How to keep Fingerwheat pages

Hold the product inside the nylon until use.
The plates that are in stock should be kept in nylon to ensure that the pallets between the pallets are of equal thickness.
Ensure that the latches between the pallets are of equal thickness and spacing during storage.
The plates in the cellar should not be in direct contact with the ground.
Pages that are on the top pallet (meaning no pallets or other panels on it) can include “local curves”. To prevent this from happening, a heavy solid must be placed on those plates.
۲٫ Plates that come out of the nylon or turn into smaller pieces should be placed in the final use of the product in climatic conditions (temperature and humidity).
۲٫ Fingertip plates should never be exposed to sunlight, wind or rain; they should be kept indoors.
۲٫ All plates should stay away from moisture and airflow until varnishing.
Cut crops in the tree structure.
The remaining parts of the cut sheet should be stored in nylon and the final product should not take much time.
۲٫ Color and varnish treatment should be applied equally to all surfaces of the product made of Fingerwash.
Avoid any process on a single Finger Giant surface at all times.
۲٫ All visible or invisible parts of a Fingerjet product must be subjected to the same process.
Verification of manufactured parts should be done as soon as possible.
۲٫ Fingerwire plates should never be attached to other sticks. If this connection is required, the cut-out pieces of Fingerjet should be bonded with PVA or MUF / POLYURETHANE adhesive.
۴٫ For flooring applications, flooring used must be clean, dry, and soft.
۲- Fingerjet pages are not suitable for outdoor use.